How It Works

Proud To Say...

New Item!!

The Bandit Hammer™

22.5 “ LONG

Patents Pending!

LATEST & GREATEST DESIGN!!

Uses cap nails

Due To R&D Specifications may change without notice

Phone orders processed with Square

THE BANDIT SIGN TOOL COMPANY™

If you like us, Please “LIKE US” :)

NO GIMMICKS...JUST THE BEST TOOLS FOR HANGING BANDIT SIGNS (PERIOD)

Ask Yourself this question...Which are better, Nails or staples? If you answered nails, you are a correct!

Second Question..What is the smartest way to nail up Bandit signs without ladders? If you answered..The Sign Sledge, Correct-amundo again!

THIRD QUESTION...WHAT ARE YOU WAITING FOR? YOUR PHONE ISN’T GONNA WRING BY ITSELF..BUY A SIGNSLEDGE TODAY!!

Instructions for hanging / installing bandit signs

Insert one nail into each clip of The Sign Sledge
Push one nail through your sign
Raise sign up to height desired
Swing the Sign Sledge once to attach sign to pole
Hammer nail until snug against sign
Now, adjust your sign so it looks level
Install the second nail
Answer your phone!

Lengthen Your Sign Sledge for under $10

Go to hardware store: Buy one length of 1 1/4” PVC (make sure it’s 1 1/4”) plumbing pipe and one black rubber Fernco fitting (a Fernco is essentially a black rubber hose with two hose clamps). You need to buy a 1 1/2” x 1 1/2” fernco as they don’t make them any smaller. Don’t worry, this will work fine!
Buy a nut driver (easier) or a 5 in 1 screw driver (if you buy a 5 in 1 remove the tip so that the socket can be used for the nut on the hose clamp)
You can use a regular screw driver but, it’s easier and faster to use the tools mentioned above.
Once you have your parts, here’s what you do. Cut the pipe to what ever length you want or leave full length.
Attach the Fernco to the piece of 1 1/4” pipe and tighten
Remove the end cap from the Sign Sledge
Insert the Sign Sledge (You want at least 2’ (two feet) of the sign sledge to be inside the larger pipe for strength and safety)
Tighten the Fernco and that’s it.

Have fun! I usually break out the big guns when I find my Signs disappearing. After employing this technique, you will laugh every time you drive by your sign :)

99 PERCENT OF THE TIME YOU NEVER NEED TO GO 18 TO 20 FEET UP BUT, IT’S NICE TO KNOW YOU CAN!

OUR TOOLS WORK WITH ALL BRANDS OF CAP NAILS / BUTTON CAP OR BUTTON TOP / ROOFING FELT NAILS

ALL METAL CAP NAILS ARE A HEAVIER GAUGE NAIL AND RESIST BENDING AS COMPARED TO THE PLASTIC CAP NAILS. FOR BEST RESULTS, BUY A 50 POUND BOX OF 1 1/4” METAL ROUND HEAD CAP NAILS FROM YOUR LOCAL SPECIALTY ROOFING SUPPLY.

Installs Coroplast, wood & aluminum Signs

For wood or metal signs, just pre-set your nails (let tip of nail protrude a little).

All metal Cap nails are recommended for wood signs and are the best for all signs although plastic cap nails may be used on coroplast without any problems.

Plastic cap nails last about 100 times longer than staples

All metal cap nails are the best and are estimated at 900 times better holding power as compared to staples.

DO NOT USE THE SIGN SLEDGE NAIL HOLDERS/ CLIPS TO PULL NAILS.

Sign Sledge™ ~ West Grove, PA. ~ Ph. 1-855-788-6746